Fine wood works are fancy works. Creating wood blocks with shapes that are absolute beauty are in its domain. A coping saw has no alternative in this regard. Coping saw is a cheap, simple and handy tool for you if you have a fascination with wood and plastic designing. It is a dream weaver. Proceed to find the best coping saws.
Table of Contents
- 1 What is a Coping Saw?
- 2 How to Recognize the Best Coping Saw
- 3 Our Recommended Best Coping saws
- 4 Understanding Coping Saw Blades
- 5 How to Change Coping Saw Blades
- 6 Coping Saw Uses
- 7 How to Use a Coping Saw Safely
- 8 Frequently Asked Question(FAQ)
- 9 Conclusion
What is a Coping Saw?
A coping saw is not just like another traditional saw. It has a narrow blade. The most identifying feature of a coping saw is its shape. You will see a D shaped frame holding a slim saw blade.
Coping saw got its name from the term “cope”. Cope is a kind of fancy cut in carpentry. It is used in finish carpentry.
This saw is under a group of saws called bow saw since it has a bow-shaped frame holding the blade. It is specially build to embed intricate internal and external cuts in wood. In carpentry or woodworking, the interior designing through cut outs is a delicate job. A coping saw has its physique designed for it.
It has profound application in molding cuttings. Though fretwork is the task that requires a fretsaw, a coping saw may also serve that purpose. But its work would not be so intricate.
The blades of a coping saw are thicker than that of a fretsaw. As a result, its cutting is much coarser than that of most of the other bow saws. It has a specialty. It can cut curves and eventually can provide you a circular cut.
How to Recognize the Best Coping Saw
It is easy to find the best coping saw among the available ones at your hand. But to do so you should definitely need to know the parameters depending on which you would pick up the best one. Here are those parameters:
The frame of a coping saw has a deep throat. More the depth of the saw the more you get space surrounding its blade while sawing. But it should not be so deep that it bothers you by hitting the support on which you are cutting your workpiece.
The material of the frame is another factor that determines your sewing experience. It should be strong enough to be sturdy but alongside, should not be so dense a material that it turns heavy. That is, find a strong and stout yet light weighed frame.
The comfort of cutting and carving often depends on the handle the most. The handle should be ergonomically designed and easy in operation.
The material of the handle regulates its coziness. Modern coping saws have handles made of tough plastic covered with rubber at the gripping surfaces. Those ensure some fine grip on the tool and reduce the chance of slipping out.
Some wooden handles are also there. But this is, in many instances, a personal decision.
The ideal coping saw comes up with good quality mechanically handles pins. Those pins hold the blade. Their sole function is to maintain the angle and tension of the blade.
Slotted pins are easy to operate. Removing and putting the blades on such pins is easy compared to other ones. If you find one, don’t miss the opportunity to grab it.
The blade is the main part of a coping saw as far a cutting is concerned. But it ranked last in the buying guide list since the blades are cheap and can be bought separately.
In case of blades you must check the quality, TPI value and the material it is made up of. In most cases, they are made of steel and their TPI value ranges from 12 to 15.
Our Recommended Best Coping saws
1. Olson Saw SF63510 Coping Saw
Olson Saw is ready with its Coping saw to make your projects done.
Features and Advantages:
A professional saw like this one is hard to find. It has a strong and sturdy body. Your sawing blades should easily get fitted if they are pin ended. Because there are pins at the terminal ends of the bow frame to receive standard pin end saw blades. You can control the tension of the blades with the help of them.
The blade that Olson Saw offers you can be rotated all the way 360 degrees. That is you can saw your workpiece in almost all the direction. So do not worry trying a curve that crosses your mind.
You will be comfortable while exerting both pushing and pulling stroke. It is fundamentally important since it simply doubles the speed of your work.
The handle is made of hardwood. It is simply designed for an ergonomic use.
For the nerds: the depth of the cuts is about 43/4 inches. The blade has a TPI rating of 15. So you will have 15 tiny teeth just in an inch.
Handling hardwood is what it is made for. So choose your favorite hardwood and do not spend time in the decision-making process. Utilize all your time in woodworking.
It is the thumb screw and the handle that allows you to tension the saw blades perfectly. This profoundly assists you to cut more precisely, especially the irregular shaped portions. You have an entire control in it.
Some find it unable to saw through wood while removing dovetail waste. Well, this is the basic application of it.
While some others have complaints against the provided handle. It bends and makes harder to get acclimatized in applying strokes.
2. BAHCO 301 6 1/2 Inch Coping Saw
The BAHCO coping saw has a simple and tidy look. It is 6 and a half inch in length. The throat of the bow of the coping saw is a bit rectangular in appearance.
The frame of this bow saw is made of steel. Why is this special? It is nickel plated. So, definitely, this urges some attention.
Talking about the handle is equivalent to talking about your comfort in its usage. Yes, it is ready for that too! Lovely handle that it has is made of beech wood. And you know what? Additionally, it is orange lacquer.
It is friendly to use when blades are concerned. You can interchange blades that are fitted. This is due to the pins at the ends of the frame to retain blades.
Maybe you are wondering what the blades are made of. They are made of some tempered carbon steel. The steel is of the hardened category. Hence, eventually, you get some sturdy blades.
Moreover, the blades are rotatable up to 360 degrees. So you can use them to apply beautiful curves and cuts on your workpiece wood. Blades have 14 teeth per inch.
There is not enough tension on the blade. So the blade may guide you a nonlinear path while coping some hardwood. You may need to buy blades of your own. The provided ones may not serve your desired purpose.
3. Knew Concepts Woodworker’s Aluminum COPING Saw
The coping saw that Knew Concepts would offer you can be marked for its lightweight. It is only 9 ounces in weight. On the other hand, the traditional coping saws weigh around 9.5 or 9.8 ounces.
It is machined from thick aluminum. The Knew Concepts coping saw would readily accept 6.5 inches coping saw blades. Make sure the blades you are using are pinned type and standard in size.
The bow frame is not only appealing in color and decoration but also has a 6 and a half inches of deep throat.
Tensioning blades is a major factor for coping saws. In this case, the blade is usually tensioned by the help of a cam lever. It pulls the blade well stretched. Now you can make tighter turns easily which seems hard for most traditional saws.
It is a cool tool for curving. It locks in 8 positions which are 45 degrees. As a result, you obtain a 360-degree rotation of the blade in a much-controlled procedure. This avails for the hooks of the blade. They are made of solid steel.
To prevent any unexpected rotation, the hooks are loaded with spring. What you need to do is squeeze together each of the hook assemblies to index. When you will be releasing it, it will again get locked in position. Thanks to internal spring.
As compared to the other parts of the coping saw, the handle is not that comfortable.
Over tightening the blade may snap your blade.
4. Robert Larson 540-2000 Coping Saw
From Germany comes the coping saw of Robert Larson with some delicacy.
Features and Advantages:
Changing the angle of the blade is the most prominent feature of not only Robert Larson but also all another coping saw. It helps you approach your work in the best way. Coping saw is used to embed some intricate woodwork. And it is quite impossible if you do not have this feature in the list of your coping saw.
But probably you will be amazed at the blade tensioning method of this coping saw. You can adjust the tension of your pinned coping saw blade with just a turn of its handle. Isn’t it amazing when you are in a hurry and you do not want to lose the opportunity of designing a perfect design?
What blades can you use? Rather you ask what coping saw blade you can’t use. Almost all standard sizes of coping saw blades are acceptable to this mighty coping saw. All you need is to have the feature of pins with it.
The handle is simple. It is made of wood. And its grip is that simple as it is built.
Complaints are heard that the blades turn even when you are using them. Enough tension is not found.
The frame gets a bit bent after multiple usages. Finishing is not too good to label excellent.
5. Stanley 15-104 Fatmax Coping Saw
Here comes Stanley with its Fatmax Coping Saw.
Features and Advantages:
The blade is hardened and tempered. So it promises to give a clean and controlled cut. Sturdy blades are the best ones on the market since they are less versatile to movement. And keep one thing in mind that coping saws are saws with thin blades.
The handle will be comfortable to grasp. It is ergonomically designed and has a cushion grip to let you feel that cozy feeling.
Those who like a delicacy in work and are themselves “delicately” nerd about specifications, this section is for them. The blade length is 6 and half an inch. With that, the overall length appears to be 13 and a quarter inch. The throat that this coping saw comes up with is 4 and three fourth of an inch.
The handle is made of rubber and plastic. This gives you good control and grip on not only the handle and the tool but also in your cutting and designing.
You will find 16 points in every inch of the blade. So you are quite free about the points. And the blade has 15 teeth per inch (TPI).
It has turned out to be a regular complain about this product that the bolt that comes up with it snaps or breaks after a few times of usages. The purpose of the bolts is to hold and provide enough tightness to the blade.
The handle is a bit less effective since in many of the cases it is a bit misaligned of loose enough to permit rotation while operation.
Understanding Coping Saw Blades
Actually, blades are the part and parcel of the coping saw itself. So they should be understood along with the other parts of the saw, especially the pins and the handle.
Coping saw blades are usually made of steel. They are cheap since they are fragile and needs snaps out easily.
They are thin yet strong enough to cut heavy materials. The teeth of the coping saw blades face back towards the handle. This means that the blade cuts while pulling, i.e. in the backstroke.
If the teeth of the blades were facing opposite to the handle, this would have applied a pressure on the frame. Thus the blade would vary in its tension while sawing.
The blades are to be tightened while using them. To stretch them the pins are to be rotated and finally kept aligned to each other perfectly. Otherwise, the teeth may not remain in a straight line. This will create torsion on the blade and will affect the durability of it to some extent along with a worse cut.
How to Change Coping Saw Blades
Coping saw blades are thin. So they may snap anytime. Moreover, they may get worn out just like other tools and instruments.
Removing the blade:
To change the worn out blade firstly hold the pin adjacent to the handle. With another hand rotate the handle left or anti-clockwise. This will loosen the blade or reduces the tension of the blade. Gradually you will observe that the space between the two terminal pins get closer and eventually the blade will come out.
A faster version of removing a blade is to apply pressure on the two ends of the frame. This also loosens the blade. Then pull out the blade gently. But this may not work for the coping saws having a too sturdy frame. Besides this is not a healthy practice as well.
Putting the blade in:
In order to put a blade into the frame firstly carefully inspect whether the teeth are facing downwards.
Now put the upper end of the blade into the upper slot. Put the other end of the blade into the slot near the hand. Now the blade is in a loosened position. Rotate the handle clockwise to tighten the blade up. Do not forget to hold the pin while rotating the handle.
Coping Saw Uses
1. Crown Molding
Coping saws are widely used in crown moldings. We use the crown moldings with a view to decorate and beautify our house. The moldings are typically made of wood or similar materials.
The crown moldings are made of materials that can be easily cut by coping saws. Since these are decorative units in carpentry, so are the coping saws, they go hand in hand.
2. Coping Joints
Coping saw is extensively used to create coped joints in moldings. Miter joints are quite less effective when compared with coped joints.
3. Cutting out dovetail wastes
You may use a chisel to get rid of the wastes on your dovetails. But that’s about a lot of pressure application and a waste of energy. Most importantly this does not always give you an appealing finishing.
Coping saws are very useful for this purpose. Since dovetail waste removing is a subtle work, coping saw fits well in it. You may also use a fret saw instead.
Though scroll saw is dedicated to scrolling wood, a coping saw may also be used for it. Scroll saws are electrically powered. Hence you get your tasks done in a minimal time. But coping saws do not lack the capability of serving the same.
Coping saw is enough to perform, at least, basic cuts when you are not near a power source. And you would get rid of the disturbing sound that a scroll saw produces.
5. Cutting shapes
One can cut different shapes and mosaics out of wood, plastic, acrylic and similar materials. Shapes of different letters and objects are prepared using it.
How to Use a Coping Saw Safely
A coping saw is practically used to cut moldings or crown moldings and other intricate woodworks.
In order to use a coping saw for cutting the first thing you need to do is lay out some lines. You may use a bar clamp or a vise to firmly hold your workpiece tightly. Now to start cutting you should put the central tooth on that line and begin with some short strokes.
After you have passed the stage of initialization you need to precede your cutting following the line of your design. Don’t forget to remove all other objects away from the blade including your own fingers.
A coping saw cuts more while pulling strokes. To get some shorter verse you may hold the handle like a door handle. Don’t apply much pressure otherwise the thin blade may get broken.
If you are congested with the place and position of cutting, e.g. you hitting the frame with the workbench, then you may change the blade angle and resume your work.
Frequently Asked Question(FAQ)
1. How long are coping saw blades?
Ans: Coping saw blades are length varying from 63/8 inches to 6 and a half inches. But the 6 ½ inch blade is the standard size.
2. How to use a coping saw on crown molding
Ans: Follow the following steps to use a coping saw in crown molding:
Firstly, you make the layout. What you need to do additionally is to miter the cope. You need to start your job at the flat following the bottom edge of your molding.
Now you need to change the angle of your saw. You may do it by changing the angle of the coping saw or may move yourself to attain a favorable angle. Begin your cut from the back.
The upper section of the cove is to be cut next. Then the fillet needs to be cut off. The cuts are to be performed along the S curve. Finally cut flat along the top of the molding.
3. Why is a coping saw good for cutting curves?
Ans: A coping saw has thin blades for delicate and intricate cutting. Besides, most of the time it is specially built for wood cutting.
It has a comfortable handle, pinned blades of a good number of teeth per inch, a deep throat to allow spaces around the blade and some pins to rotate the blades into desired angles as well as to stretch out the blade to attain a sturdy tension.
All these features allow coping saw to be used in cutting curves and cut them with perfection and ease. Especially the feature of setting the blade to different angles helps a lot for this purpose. Besides, the tuning of the tension of the blade is another prominent feature of good curves.
4. Can coping saw cut metal?
Ans: You can cut metal with a coping saw but you need to ensure two parameters rightly. One is the blade you select and the other one is whether that blade is perfect for that specific metal.
Usually, a coping saw is able to cut through aluminum tubing or other similar metal stuff when the proper blade is selected. But a hacksaw is better and effective for this purpose.
5. Can a coping saw cut plastic?
Ans: Actually coping saws are built to cut not only wood but also plastic materials. It is designed for cutting subtle design and curves in both plastic and wood work piece.
So, one can surely use a coping saw to cut plastic.
Coping saw is a cheap and useful tool. To get the best out of it one needs to know about its construction and applications. These are carpentry tools but are as handy as stationeries. Carpentry, project making, and modeling have now been ushered into a new era due to the best coping saws around us.